skip to Main Content

1″ Tracker & Chopper Motorcycle Handlebars – Chrome (Various Sizes)

£69.99

1″ Tracker & Chopper style handlebars from Renntec, made from 2mm wall mild steel and (also available in Black) CNC mandrel bent and then nickel chrome coated, please see picture in gallery for sizes available.

Construction: 1inch O.D. x 2mm wall mild steel tubing. All bends are created with internal mandrels on a CNC bender to reduce flat spots in the radii. For sizes available & measurements, please refer to the chart in gallery picture.

Fitment: Tracker style bars are a bit lower than most original equipment handlebars, so retro fitment with stock cables and wiring is generally a snap. The taller chopper style bars may need some extra work with cables etc. Note: as Tracker & Chopper bars are slightly wider than stock bars, please consider turning angle and tank size/mounting before ordering.

A Few Words on Knurling: We don’t knurl our bars because doing so reduces the surface area where the handlebar makes contact with the risers, thereby compromising clamping power. Stock and aftermarket steel risers commonly found on cruisers and custom big twins have a material density 4 times greater than aluminium. This density doesn’t let knurling bite into the riser material, which in turn compromises clamping strength.

SKU: RENTRACKC Categories: ,
EMAIL TO A FRIEND

Description

1″ Tracker & Chopper style handlebars from Renntec, made from 2mm wall mild steel and (also available in Black) CNC mandrel bent and then nickel chrome coated, please see picture in gallery for sizes available.

Construction: 1inch O.D. x 2mm wall mild steel tubing. All bends are created with internal mandrels on a CNC bender to reduce flat spots in the radii. For sizes available & measurements, please refer to the chart in gallery picture.

Fitment: Tracker style bars are a bit lower than most original equipment handlebars, so retro fitment with stock cables and wiring is generally a snap. The taller chopper style bars may need some extra work with cables etc. Note: as Tracker & Chopper bars are slightly wider than stock bars, please consider turning angle and tank size/mounting before ordering.

A Few Words on Knurling: We don’t knurl our bars because doing so reduces the surface area where the handlebar makes contact with the risers, thereby compromising clamping power. Stock and aftermarket steel risers commonly found on cruisers and custom big twins have a material density 4 times greater than aluminium. This density doesn’t let knurling bite into the riser material, which in turn compromises clamping strength.

Additional information

Part Number

REN4124C, REN4125C, REN4126C, REN4127C, REN4136C, REN4137C, REN4139C, REN4140C, REN4141C, REN4142C, REN4143C, REN4144C, REN4145C, REN4146C, REN4147C, REN4148C, REN4150C, REN4151C

All text, images and photos are copyright © and the property of Renntec Ltd. They must not be reproduced without prior permission.